RCF SUB 9004-AS 18″ Active High Power Subwoofer 2800W Black

SUB9004AS 1×18″ Active High Power Subwoofer 2800W The SUB 9004-AS is a single 18” high power active subwoofer. It employs a state of the art transducer featuring a hyper-vented high power neodymium magnetic circuit with 4” voice coil. The extremely high power amplifier is a new design that delivers extended low-frequency performance. Due to its rugged construction, it is perfect for AV rental inventories. RCF RDNet 3.0 The new RDNet release features extensive improvements. The audio system is now configurable in Groups of speakers or in the new Array clusters, the Air Compensation and the Cluster Size shaping are more precise and controllable, as well as the FiRPHASE gain. The subwoofer configuration is faster, even for complex EndFire set-ups. Top End Electronics The amplifier integrates a low-noise 32-bit DSP circuit, controlled through the RCF proprietary RDNet network to easily handle the soft clipping limiters, RMS limits, polarity, amplitude, timing and equalisation. All the settings, monitoring and advanced features are available inside the RDNet Networked Management software. The available control panel on the back adjusts input sensitivity, Low Cut, Xover, volume, bypass, delay and presets selection. The regulated power supply guarantees full power from 100 V to 260 V. The amplifier houses on a unique Vibrostop floating aluminium panel for extra protection during transportation. Hyper Ventilation System RCF manufactures these components to deliver the cleanest, punchiest, and undistorted low frequencies reproduction. The cone is composed of 30% carbon fibre, 20% fibreglass and 50% cellulose pulp. This particular chemical composition has been carefully developed to improve the robustness and rigidness of the cone avoiding any deformation that would result in a loss of efficiency. The 4.0″ inside/outside voice coil is wounded on a strong fibreglass former and guarantees a more efficient cooling. The former is internally and externally reinforced with Nomex that stiffen the overall structure for a better energy transfer between the voice coil and the body cone. In order to dissipate the heat generated by the powerful voice coil, RCF engineers have developed the unique Hyper Ventilation system with very low power compression. The cone is water resistant. Cabinet The cabinet is made of high-quality birch plywood with weatherproof treatment. The subs are stackable and lightweight, for an easy set-up and tear down. A pole receptacle on the top and side allows the woofer to be used in various configurations. The heavy-duty coating and the rugged structure of the cabinet withstand long-term use and transportation and the separate housing for the amplifier guarantees component efficiency and reliability. Transportation is fast thanks to the detachable Kart kit, a dolly caster-board with rugged tour grade casters and rotating cam mechanism. Specification: General Acoustical Specifications Frequency Response: 30 Hz ÷ 400 Hz Max SPL @ 1m: 136 dB Transducers Woofer: 18” neo, 4.0” v.c Input/Output Input signal: bal/unbal Input connectors: XLR, RDNet Ethercon Output connectors: XLR, RDNet Ethercon Input sensitivity: 4 dBu Processor Section Hi-Pass Frequencies: 35 Hz, 50 Hz Low-Pass Frequencies: Variable from 50 Hz to 400 Hz Protections: Thermal, RMS Limiter: Fast Limiter Controls: Gain, Eq., Preset Switch, Output Delay RDNet: Yes Power Section Total Power: 2800 W Peak, 1400 W RMS Cooling: Forced Connections: Powercon IN/OUT Standard Compliance CE Marking: Yes Cabinet Cabinet/Case Material: Baltic birch plywood Hardware: 2xM20 Handles: 2 Side Grille: Steel Colour: Black Physical & Dimensions Height: 700 mm / 27.56 inches Width: 558 mm / 21.97 inches Depth: 700 mm / 27.56 inches Weight: 57 kg / 125.66 lbs